Overview

Features

Typical Applications

LM072 Bluetooth® Module

Standalone (With Embedded Bluetooth® v2.0/v2.1 Stack)

Part No.

Product

Revised

29/MAY/2018

Datasheet Version

2.1

See Last Page

LM072

Bluetooth® v2.0, v2.1 wireless technologiy

18 dBm Tx Output Power and -82 dBm Rx Sensitivity

SPP and HID available

Configurable with AT Command Set

Up to 100m range (in open space)

28.2mm x 15mm x 2.8mm

Extensive Technical Support Available

RF Antenna Interface

UART, USB 2.0 (Full Speed), AIO and PIO Interfaces

RTS/ CTS Flow control UART lines

PCM Audio Interfaces

Configurations pre-installed on production

Serial Communications

Medical Devices

Domestic and Industrial Applications

Embedded Devices

Remote Monitoring and Control

GPS, POS, Barcode Readers

Payment Terminals

SMT Side and Bottom Pads for easy production

See our website for this products certifications.

RoHS, REACH and WEEE

The LM072 Bluetooth® v2.0, v2.1 data module provides a secure and reliable Bluetooth® Classic connection. This wireless connection

reaches a range of up to 100m in open space, with the option to add an antenna that suits your requirements e.g. a dipole and PCB

antenna. The selected antenna could provide a longer range, omnidirectional or unidirectional connection with nearby Bluetooth®

Classic devices.

The module acts as a standalone unit (i.e. no external MCU required) and/ or can interface with embedded microcontrollers via UART.

Peripheral devices can be directly controlled by the module to suit the user application. LM oer technical support to the developer and

can create new user applications for the module.

The AT Command set makes configuration of the firmware simple. The developed firmware and settings can be preloaded to the

module, simplifying the manufacturing and testing process. Its SMT side and bottom pads allows for easy integrations into your embed-

ded system.

28.2mm

15mm

2.8mm

LM072

Page 1 of 11

+44(0) 207 428 2647 | sales@lm-technologies.com

v2

New

See version

notes page

for changes