TLWD1100(T11)

2007-10-01

3

Note 3: Iv rank classification

Test conditions: IF=20mA, Ta=25°C

Product name

min

typ

max

TLWD1100(T11)

63

180

320

QA

63

⎯

125

RA

100

⎯

200

SA

160

⎯

320

20

Unit

mcd

mA

The specification on the above table is used for Iv classification of LEDs in Toshiba facility.

Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.

Note 4: Caution

ESD withstand voltage according to MIL STD 883D, Method 3015.7 : ≥1000V

When handling this LED, take the following measures to prevent the LED from being damaged or otherwise

adversely affected.

1) Use a conductive tablemat and conductive floor mat, and ground the workbench and floor.

2) Operators handling laser diodes must be grounded via a high resistance (about 1MΩ). A conductive strap is

good for this purpose.

3) Ground all tools including soldering irons.

This product is designed as a general display light source usage, and it has applied the measurement standard

that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application

(ex. Light source for sensor, optical communication and etc) except general display light source.