6. "AT+BIND" bind another BLE chip. BLE can only connect to the BLE chip with this MAC

address

AT+BIND=0x0017ea9397e1<CR+LF>

Set the BLE binding (destination) MAC address to

0x0017ea9397e1

AT+BIND=?<CR+LF>

Request the binding (destination) MAC address

(default: 0x8A6D3B8A6D3B)

7. "AT+CMODE" set whether the connection of BLE is binding or arbitrary

AT+CMODE=UNIQUE<CR+LF>

BLE can only connect to the BLE chip with

binding(destination) MAC address (see "AT+BIND"

command)

AT+CMODE=ANYONE<CR+LF>

BLE can connect to any other BLE chips

AT+CMODE=?<CR+LF>

Request the binding connection mode(default:ANYONE)

8. "AT+MAC" Request MAC address

AT+MAC=?<CR+LF>

Request MAC address of the BLE

9. "AT+NAME" Set the name

AT+NAME=DFBLEduinoV1.0<CR+LF>

Set the name of BLE to "DFBLEduinoV1.0".The

length is limited to 13 Bytes or below