VCC, RS+, RS- to GND.........................................-0.3V to +30V

OUT to GND............................................. -0.3V to (VCC + 0.3V)

Differential Input Voltage (VRS+ - VRS- )...............................±8V

Output Short Circuit to VCC.......................................Continuous

Output Short Circuit to GND.................................................... 1s

Current into Any Pin .........................................................±20mA

Continuous Power Dissipation (TA = +70°C)

5-Pin SOT23 (derate 3.10mW/°C above +70°C) ...246.70mW

8-Pin µMAX (derate 4.5mW/°C above +70°C)............362mW

8-Pin SO (derate 5.88mW/°C above +70°C)...............471mW

14-Pin SO (derate 8.33mW/°C above +70°C).............667mW

14-Pin TSSOP (derate 9.1mW/°C above +70°C)........727mW

Operating Temperature Range......................... -40°C to +125°C

Junction Temperature......................................................+150°C

Storage Temperature Range............................ -65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Soldering Temperature (reflow).......................................+260°C

5 SOT23

PACKAGE CODE

U5+2, U5+2A

Outline Number

21-0057

Land Pattern Number

90-0174

Thermal Resistance, Multi-Layer Board:

Junction to Ambient (θJA)

255.90°C/W

Junction to Case (θJC)

81°C/W

Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board.

For detailed information on package thermal considerations, refer to

www.maximintegrated.com/thermal-tutorial.

For the latest package outline information and land patterns (footprints), go to

www.maximintegrated.com/packages. Note that a “+”,

“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing

pertains to the package regardless of RoHS status.

Package Information

www.maximintegrated.com

Maxim Integrated │ 2

MAX4376/MAX4377/

MAX4378

Single/Dual/Quad, High-Side

Current-Sense Amplifiers with Internal Gain

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these

or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Absolute Maximum Ratings