HSF1 datasheet(21/40 Pages) CLARKE

Part #	HSF1

Description	MIG/MMA/TIG INVERTER WELDER

PDF	40 Pages

Scroll/Zoom	100%

Manufacturer	CLARKE [Clarke International]

Direct Link	https://www.clarkeinternational.com/

Logo

21 / 40 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Attach the earth clamp to the workpiece as close as possible to the area being

welded. Clean with a wire brush where necessary to ensure the connection is as clean

as possible.

PREPARING THE WORKPIECE

The area being welded should be perfectly clean. Any coating, plating or corrosion

must be removed, otherwise a good weld will be impossible to achieve.

OVERHEATING

The “Protection” indicator light may come on after a long period of operation. It

shows that the inner temperature is over the permitted level, and the machine should

be stopped for some time to let it cool down. You can continue work after the

“Protection” indicator light goes off.

The power source should be switched off the power to the machine after operation or

while temporarily leaving the work site.

HSF1 Datasheet(PDF) 21 Page - Clarke International