G9SP datasheet(19/22 Pages) OMRON

19 / 22 page

D41D

Set-up and Maintenance/Disassembly and Disposal

Set-up and Maintenance

Functional testing

The safety function of the safety components must be tested.

The following conditions must be previously checked and met:

1. Fitting of the sensor and the actuator.

2. Fitting and integrity of the power cable.

3. The system is free of dirt and soiling (in particular metal chips).

Maintenance

Maintenance frequency

SIL3 / PLe at least once a month

SIL2 / PLd at least once a year

(Daily inspection)

• For each guard door, check that the machine stops when the guard

door opens.

(Inspection every 6 months)

1. Check the fitting and integrity of the safety door switch, the

actuator and the cable.

2. Remove possible metal chips.

3. Check that the cable is connected correctly and there is no

problem.

Disassembly and Disposal

Disassembly

The product must be disassembled in a de-energized condition only.

Disposal

The product must be disposed of in an appropriate manner in

accordance with the national prescriptions and legislations.

G9SP Datasheet(PDF) 19 Page - Omron Electronics LLC