UG-855 datasheet(13/29 Pages) AD

13 / 29 page

EVAL-AD7124-4SDZ User Guide

UG-855

Rev. 0 | Page 13 of 29

Tutorial Button

Clicking TUTORIAL (Label 4) opens a tutorial on using the

software, which provides additional information on using the

AD7124-4 EVAL+ Software.

Functional Block Diagram

The functional block diagram of the ADC (Label 5) shows each

of the functional blocks within the ADC. Clicking a configuration

button on this graph opens the configuration popup window for

that block.

Configuration Pop-Up Button

Each configuration pop-up button (Label 6) opens a different

window allowing configuration of the relevant functional block.

CONFIG SUMMARY

Clicking CONFIG SUMMARY (Label 7) displays the channel

configuration, information on the individual setups, as well as

information on any error present. These tabs can be used to

quickly check how the ADC channels are configured, as well as

any errors that are present.

Demo Modes

The AD7124-4 EVAL+ Software supports a number of demo

modes (Label 8); these demo modes configure the AD7124-4 for

each of the modes shown. A help file is available for each demo

mode; to access this help file, click the question mark button.

Status Bar

The status bar (Label 9) displays status updates such as Analysis

Completed

, Reset Completed, and Configuring Demo Mode

during software use, as well as the software version and the

Busy

indicator.

Figure 20. Configuration Tab of the AD7124-4 EVAL+ Software

UG-855 Datasheet(PDF) 13 Page - Analog Devices