CS5461A datasheet(21/44 Pages) CIRRUS

21 / 44 page

CS5461A

DS661F2

dal inputs so there are no problems with slow edge

times.

The CS5461A can be driven by an external oscillator

ranging from 2.5 to 20 MHz, but the K divider value must

be set such that the internal MCLK will run somewhere

between 2.5 MHz and 5 MHz. The K divider value is set

with the K[3:0] bits in the Configuration Register. As an

example, if XIN = MCLK = 15 MHz, and K is set to 5,

then DCLK is 3 MHz, which is a valid value for DCLK.

5.12 Event Handler

The INT pin is used to indicate that an internal error or

event has taken place in the CS5461A. Writing a logic 1

to any bit in the Mask Register allows the corresponding

bit in the Status Register to activate the INT pin. The in-

terrupt condition is cleared by writing a logic 1 to the bit

that has been set in the Status Register.

The behavior of the INT pin is controlled by the IMODE

and IINV bits of the Configuration Register.

If the interrupt output signal format is set for either falling

or rising edge, the duration of the INT pulse will be at

least one DCLK cycle (DCLK = MCLK/K).

5.12.1 Typical Interrupt Handler

The steps below show how interrupts can be handled.

INITIALIZATION:

1) All Status bits are cleared by writing 0xFFFFFF to

the Status Register.

2) The condition bits which will be used to generate

interrupts are then set to logic 1 in the Mask Reg-

ister.

3) Enable interrupts.

INTERRUPT HANDLER ROUTINE:

4) Read the Status Register.

5) Disable all interrupts.

6) Branch to the proper interrupt service routine.

7) Clear the Status Register by writing back the read

value in step 4.

8) Re-enable interrupts.

9) Return from interrupt service routine.

IMODE

IINV

INT Pin

Active-low Level

Active-high Level

Low Pulse

Table 3. Interrupt Configuration

High Pulse

IMODE

IINV

INT Pin

Table 3. Interrupt Configuration

CS5461A Datasheet(PDF) 21 Page - Cirrus Logic

CS5461A Datasheet(HTML) 21 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Datasheet Download

Link URL