ATmega88 datasheet(78/340 Pages) ATMEL

78 / 340 page

7530H–AVR–02/09

ATmega48/88/168 Automotive

• T1/OC0B/PCINT21 – Port D, Bit 5

T1, Timer/Counter1 counter source.

OC0B, Output Compare Match output: The PD5 pin can serve as an external output for the

Timer/Counter0 Compare Match B. The PD5 pin has to be configured as an output (DDD5 set

(one)) to serve this function. The OC0B pin is also the output pin for the PWM mode timer

function.

PCINT21: Pin Change Interrupt source 21. The PD5 pin can serve as an external interrupt

source.

• XCK/T0/PCINT20 – Port D, Bit 4

XCK, USART external clock.

T0, Timer/Counter0 counter source.

PCINT20: Pin Change Interrupt source 20. The PD4 pin can serve as an external interrupt

source.

• INT1/OC2B/PCINT19 – Port D, Bit 3

INT1, External Interrupt source 1: The PD3 pin can serve as an external interrupt source.

OC2B, Output Compare Match output: The PD3 pin can serve as an external output for the

Timer/Counter0 Compare Match B. The PD3 pin has to be configured as an output (DDD3 set

(one)) to serve this function. The OC2B pin is also the output pin for the PWM mode timer

function.

PCINT19: Pin Change Interrupt source 19. The PD3 pin can serve as an external interrupt

source.

• INT0/PCINT18 – Port D, Bit 2

INT0, External Interrupt source 0: The PD2 pin can serve as an external interrupt source.

PCINT18: Pin Change Interrupt source 18. The PD2 pin can serve as an external interrupt

source.

• TXD/PCINT17 – Port D, Bit 1

TXD, Transmit Data (Data output pin for the USART). When the USART Transmitter is enabled,

this pin is configured as an output regardless of the value of DDD1.

PCINT17: Pin Change Interrupt source 17. The PD1 pin can serve as an external interrupt

source.

• RXD/PCINT16 – Port D, Bit 0

RXD, Receive Data (Data input pin for the USART). When the USART Receiver is enabled this

pin is configured as an input regardless of the value of DDD0. When the USART forces this pin

to be an input, the pull-up can still be controlled by the PORTD0 bit.

PCINT16: Pin Change Interrupt source 16. The PD0 pin can serve as an external interrupt

source.

Table 10-10 and Table 10-11 relate the alternate functions of Port D to the overriding signals

shown in Figure 10-5 on page 68.

ATmega88 Datasheet(PDF) 78 Page - ATMEL Corporation