| Electronic Components Datasheet Search |
|
PCF8566P Datasheet(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF8566P Datasheet(HTML) 8 Page - NXP Semiconductors |
|
8 / 48 page ![]() PCF8566_7 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 07 — 25 February 2009 8 of 48 NXP Semiconductors PCF8566 Universal LCD driver for low multiplex rates A practical value for VLCD is determined by equating Voff(RMS) with a defined LCD threshold voltage (Vth), typically when the LCD exhibits approximately 10 % contrast. In the static drive mode a suitable choice is VLCD >3Vth. Multiplex drive modes of 1:3 and 1:4 with 1 ⁄2 bias are possible but the discrimination and hence the contrast ratios are smaller. Bias is calculated by , where the values for a are a = 1 for 1 ⁄2 bias a = 2 for 1 ⁄3 bias The RMS on-state voltage (Von(RMS)) for the LCD is calculated with the equation (1) where VLCD is the resultant voltage at the LCD segment and where the values for n are n = 1 for static mode n = 2 for 1:2 multiplex n = 3 for 1:3 multiplex n = 4 for 1:4 multiplex The RMS off-state voltage (Voff(RMS)) for the LCD is calculated with the equation: (2) Discrimination is the ratio of Von(RMS) to Voff(RMS) and is determined from the equation: (3) Using Equation 3, the discrimination for an LCD drive mode of • 1:3 multiplex with 1 ⁄ 2 bias is Table 5. Preferred LCD drive modes: summary of characteristics LCD drive mode Number of: LCD bias configuration Backplanes Bias levels static 1 2 static 0 1 ∞ 1:2 multiplex 2 3 1 ⁄ 2 0.354 0.791 2.236 1:2 multiplex 2 4 1 ⁄ 3 0.333 0.745 2.236 1:3 multiplex 3 4 1 ⁄ 3 0.333 0.638 1.915 1:4 multiplex 4 4 1 ⁄ 3 0.333 0.577 1.732 V off RMS () V LCD -------------------------- V on RMS () V LCD ------------------------- D V on RMS () V off RMS () -------------------------- = 1 1a + ------------- V on RMS () 1 n --- n 1 – () 1 1a + ------------- × 2 + n ------------------------------------------------------------ V LCD = V off RMS () a 2 2a n + () – n 1a + () 2 × --------------------------------- V LCD = V on RMS () V off RMS () ------------------------ a1 + () 2 n 1 – () + a1 – () 2 n 1 – () + -------------------------------------------- = 3 1.732 = |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |