Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

PT2268 V2.5

- 16 -

April, 2006

Remote Control Encoder

PT2268

Notes:

1. Dimensioning and tolerancing per ANSI Y14.5-1982.

2. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold Flash protrusion or gate

burrs shall not exceed 0.15mm (0.006 in) per side.

3. Dimension “E” does not include interlead flash or protrusions. Interlead flash or protrusions shall

not exceed 0.25 mm (0.010 in) per side.

4. The chamfer on the body is optional. It is not present, a visual index feature must be located within

the crosshatched area.

5. “L” is the length of the terminal for soldering to a substrate.

6. “N” is the number of terminal positions. (N=16)

7. The lead width “B” as measured 0.36 mm (0.014 in) or greater above the seating plane, shall not

exceed a maximum value of 0.61 mm (0.24 in).

8. Controlling dimension: MILLIMETER.

9. Refer to JEDEC MS-013 Variation AA

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.