REV. 0

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties

which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Analog Devices.

a

ADP3405

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

World Wide Web Site:www.analog.com

Fax: 781/326-8703

© Analog Devices, Inc., 2001

FEATURES

Handles all GSM Baseband Power Management

Functions

Four LDOs Optimized for Specific GSM Subsystems

Charges Li-Mn Coin Cell for Real-Time Clock

Charge Pump and Logic Level Translators for 3 V and 5 V

GSM SIM Modules

Narrow Body 4.4 mm 28-Lead TSSOP Package

APPLICATIONS

GSM/DCS/PCS Handsets

TeleMatic Systems

ICO/Iridium Terminals

GSM Power Management System

FUNCTIONAL BLOCK DIAGRAM

DIGITAL

LDO

VCC

VRTC

VTCXO

PWRONKEY

ROWX

PWRONIN

RESET

ANALOGON

POWER-UP

SEQUENCING

AND

PROTECTION

LOGIC

ADP3405

VBAT

REFOUT

AGND

VCCA

RESCAP

CHRON

SIMBAT

CAP+

CAP

SIMPROG

SIMON

SIMGND

RESETIN

CLKIN

DATAIO

CHARGE

PUMP

LOGIC LEVEL

TRANSLATION

BUFFER

REF

+

I/O

RST

CLK

VSIM

RTC LDO

XTAL OSC

LDO

ANALOG

LDO

DGND

GENERAL DESCRIPTION

The ADP3405 is a multifunction power management system IC

optimized for GSM cell phones. The wide input voltage range of

3.0 V to 7.0 V makes the ADP3405 ideal for both single cell Li-Ion

and three cell NiMH designs. The current consumption of the

ADP3405 has been optimized for maximum battery life, featuring

a ground current of only 150

µA when the phone is in standby

(digital LDO, and SIM card supply active). An undervoltage lock-

out (UVLO) prevents the startup when there is not enough energy

in the battery. All four integrated LDOs are optimized to power

one of the critical sub-blocks of the phone. Their novel anyCAP

®

architecture requires only very small output capacitors for stability,

and the LDOs are insensitive to the capacitors’ equivalent series

resistance (ESR). This makes them stable with any capacitor,

including ceramic (MLCC) types for space-restricted applications.

A step-up converter is implemented to supply both the SIM

module and the level translation circuitry to adapt logic signals

for 3 V and 5 V SIM modules. Sophisticated controls are avail-

able for power-up during battery charging, keypad interface, and

charging of an auxiliary backup battery for the real-time clock.

These allow an easy interface between ADP3405, GSM proces-

sor, charger, and keypad. Furthermore, a reset circuit and a

thermal shutdown function have been implemented to support

reliable system design.

anyCAP is a registered trademark of Analog Devices, Inc.