STM32F407IG datasheet(28/167 Pages) STMICROELECTRONICS

Part #	STM32F407IG

Description	ARM Cortex-M4 32b MCUFPU, 210DMIPS, up to 1MB Flash/1924KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

PDF	167 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

28 / 167 page

Description

STM32F405xx, STM32F407xx

28/167

Doc ID 022152 Rev 2

Standby mode, the SRAM and register contents are lost except for registers in the

backup domain and the backup SRAM when selected.

The device exits the Standby mode when an external reset (NRST pin), an IWDG reset,

a rising edge on the WKUP pin, or an RTC alarm / wakeup / tamper /time stamp event

occurs.

Note:

When in Standby mode, only an RTC alarm/event or an external reset can wake up the

device provided VDD is supplied by an external battery.

2.2.19

VBAT operation

The VBAT pin allows to power the device VBAT domain from an external battery, an external

supercapacitor, or from VDD when no external battery and an external supercapacitor are

present.

VBAT operation is activated when VDD is not present.

The VBAT pin supplies the RTC, the backup registers and the backup SRAM.

Note:

When the microcontroller is supplied from VBAT, external interrupts and RTC alarm/events

do not exit it from VBAT operation.

2.2.20

Timers and watchdogs

The STM32F405xx and STM32F407xx devices include two advanced-control timers, eight

general-purpose timers, two basic timers and two watchdog timers.

All timer counters can be frozen in debug mode.

Table 3 compares the features of the advanced-control, general-purpose and basic timers.

STM32F407IG Datasheet(PDF) 28 Page - STMicroelectronics