TLV5636CD datasheet(3/22 Pages) TI

3 / 22 page

www.ti.com

ABSOLUTE MAXIMUM RATINGS

RECOMMENDED OPERATING CONDITIONS

ELECTRICAL CHARACTERISTICS

TLV5636

SLAS223C – JUNE 1999 – REVISED APRIL 2004

over operating free-air temperature range (unless otherwise noted)(1)

UNIT

Supply voltage (VDD to AGND)

7 V

Reference input voltage

- 0.3 V to VDD + 0.3 V

Digital input voltage range

- 0.3 V to VDD + 0.3 V

TLV5636C

0°C to 70°C

Operating free-air temperature range, TA

TLV5636I

-40°C to 85°C

Storage temperature range, Tstg

-65°C to 150°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

MIN

NOM

MAX

UNIT

VDD = 5 V

4.5

5.5

Supply voltage, VDD

VDD = 3 V

2.7

3.3

Power on Reset, POR

0.55

DVDD = 2.7 V

High-level digital input voltage, VIH

DVDD = 5.5 V

2.4

DVDD = 2.7 V

0.6

Low-level digital input voltage, VIL

DVDD = 5.5 V

VDD = 5 V(1)

AGND

2.048

VDD - 1.5

Reference voltage, Vref to REF terminal

VDD = 3 V(1)

AGND

1.024

VDD - 1.5

Load resistance, RL

Ω

Load capacitance, CL

100

Clock frequency, fCLK

MHz

TLV5636C

Operating free-air temperature, TA

°C

TLV5636I

-40

(1)

Due to the x2 output buffer, a reference input voltage . (VDD - 0.4 V)/2 causes clipping of the transfer function. The output buffer of the

internal reference must be disabled, if an external reference is used.

over recommended operating free-air temperature range, supply voltages, and reference voltages (unless otherwise noted)

POWER SUPPLY

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

No load,

Fast

2.3

3.3

IDD

Power supply current

All inputs = AGND or VDD,

Slow

1.5

1.9

DAC latch = 0x800

Power-down supply current

See Figure 8

0.01

µA

Zero scale (1)

-65

PSRR

Power supply rejection ratio

Full Scale(2)

-65

(1)

Power supply rejection ratio at zero scale is measured by varying VDD and is given by:

PSRR = 20 log [(EZS(VDDmax) - EZS(VDDmin))/VDDmax]

(2)

Power supply rejection ratio at full scale is measured by varying VDD and is given by:

PSRR = 20 log [(EG(VDDmax) - EG(VDDmin))/VDDmax]

TLV5636CD Datasheet(PDF) 3 Page - Texas Instruments

TLV5636CD Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Datasheet Download

Link URL