LMV712-N

www.ti.com

SNOS534G – MAY 2004 – REVISED MARCH 2010

LMV712-N Low Power, Low Noise, High Output, RRIO Dual Operational Amplifier with

Independent Shutdown

Check for Samples: LMV712-N

1

FEATURES

2

•

(Typical Unless Otherwise Noted)

•

•

5MHz GBP

•

2.2µs Turn On

•

Slew Rate 5V/µs

APPLICATIONS

•

Low Noise 20nV/

√Hz

•

Power Amplifier Control Loop

•

Supply Current 1.22mA/Channel

•

Cellular Phones

•

•

Portable Equipment

•

Guaranteed 2.7V and 5V Specifications

•

Wireless LAN

•

Rail-to-Rail Inputs and Outputs

•

Radio Systems

•

Unity Gain Stable

•

Cordless Phones

•

Small Package: 10-Pin WSON, 10-Pin VSSOP

and 10-Bump DSBGA

DESCRIPTION

The LMV712-N duals are high performance BiCMOS operational amplifiers intended for applications requiring

Rail-to-Rail inputs combined with speed and low noise. They offer a bandwidth of 5MHz and a slew rate of 5

V/µs and can handle capacitive loads of up to 200pF without oscillation.

The LMV712-N is guaranteed to operate from 2.7V to 5.5V and offers two independent shutdown pins. This

feature allows disabling of each device separately and reduces the supply current to less than 1µA typical. The

output voltage rapidly ramps up smoothly with no glitch as the amplifier comes out of the shutdown mode.

The LMV712-N with the shutdown feature is offered in space saving 10-Bump DSBGA and 10-Pin WSON

packages. It is also offered in 10-Pin VSSOP package. These packages are designed to meet the demands of

small size, low power, and low cost required by cellular phones and similar battery operated portable electronics.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 2004–2010, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.