Copyright © Parallax Inc.

Eddie Robot Platform (#28990 & #28992)

v1.2 11/10/2011 Page 5 of 16

Figure 3c

Connect the appropriate cables to each of the sensors. Be sure to observe proper polarity on the Ping)))

sensor cables, as shown in Figure 3c. The IR cables are polarized. Line up the tab on the cable, and

insert it into the receptacle. Be sure to fully insert them – they should “click” into place.

Set these assemblies aside for now.

Step 4: Battery Shelf Preparation

As shown in Figure 4a, the Battery Shelf components consist of a Delrin shelf, (6) 1/2” tall, round

aluminum standoffs, and (6) 4-40 x 5/8” screws.

Figure 4a