AP9319 datasheet(13/30 Pages) ETC2

13 / 30 page

Environmental Monitoring Unit — Installation and Quick Start

Accessories

Temperature and

humidity probe

The temperature and humidity probe (AP9512THBLK) monitors the

room temperature and humidity.

To install the probe:

1. Determine a location that will allow you to route and

secure the 12-foot cord neatly.

2. Attach the probe to a wall or other surface with the

provided hook-and-loop fasteners.

3. Neatly route and secure the 12-foot cord with

tie-wraps or cable clips.

4. Plug the probe connector into the port marked Probe 1 on the rear

panel of the unit.

Note

Avoid locating the probe in an area that could

give an inaccurate reading, such as near air

ducts, other heat sources, windows, direct

sunlight, or room entrances.

Note

Additional Temperature and Temperature/Humidity probes

may be purchased, including:

• Temperature Probe (AP9512TBLK)

• Temperature/Humidity Probe (AP9512THBLK)

• Temperature Probe with Digital Display (A-Link)

(AP9520T)

• Temperature/Humidity Probe with Digital Display

(A-Link) (AP9520TH)

AP9319 Datasheet(PDF) 13 Page - List of Unclassifed Manufacturers