REV. 0

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties

which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Analog Devices.

a

ADG466/ADG467

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 617/329-4700

World Wide Web Site: http://www.analog.com

Fax: 617/326-8703

© Analog Devices, Inc., 1996

Triple and Octal

Channel Protectors

FUNCTIONAL BLOCK DIAGRAMS

ADG466

ADG467

OUTPUT CLAMPED

GENERAL DESCRIPTION

The ADG466 and ADG467 are triple and octal channel pro-

tectors, respectively. The channel protector is placed in series

with the signal path. The channel protector will protect sensitive

components from voltage transience in the signal path whether

the power supplies are present or not. Because the channel

protection works whether the supplies are present or not, the

channel protectors are ideal for use in applications where

correct power sequencing can’t always be guaranteed (e.g.,

hot-insertion rack systems) to protect analog inputs. This is

discussed further, and some example circuits are given in the

“Applications” section of this data sheet.

Each channel protector has an independent operation and

consists of an n-channel MOSFET, a p-channel MOSFET and

an n-channel MOSFET, connected in series. The channel

protector behaves just like a series resistor during normal

channel’s analog input exceeds the power supplies (including

and signal source protection is provided in the event of an

overvoltage or power loss. The channel protectors can withstand

overvoltage inputs from –40 V to +40 V. See the “Circuit

Information” section of this data sheet.

The ADG466 and ADG467 can operate off both bipolar and

unipolar supplies. The channels are normally on when power is

connected and open circuit when power is disconnected. With

power supplies of

±15 V, the on-resistance of the ADG466 and

FEATURES

Fault and Overvoltage Protection up to

40 V

Signal Paths Open Circuit with Power Off

44 V Supply Maximum Ratings

Low On Resistance

ADG466/ADG467 60

typ

1 nA Max Path Current Leakage @ +25 C

max)

Low Power Dissipation 0.8

W typ

Latch-Up Proof Construction

APPLICATIONS

ATE Equipment

Sensitive Measurement Equipment

Hot-Insertion Rack Systems

ADG467 is 50

Ω typ with a leakage current of ±1 nA max.

When power is disconnected, the input leakage current is

approximately

±5 nA typ.

The ADG466 is available in 8-lead DIP, SOIC and

µSOIC

packages. The ADG467 is available in an 18-lead SOIC package

and a 20-lead SSOP package.

PRODUCT HIGHLIGHTS

1. Fault Protection.

The ADG466 and ADG467 can withstand continuous

voltage inputs from –40 V to +40 V. When a fault occurs due

to the power supplies being turned off or due to an overvolt-

age being applied to the ADG466 and ADG467, the output

is clamped. When power is turned off, current is limited to

the microampere level.

2. Low Power Dissipation.

ADG466/ADG467 60

Ω typ.

4. Trench Isolation Latch-Up Proof Construction.

A dielectric trench separates the p- and n-channel MOSFETs

thereby preventing latch-up.

OBSOLETE