UM0425

General User Interface

5/11

2

General User Interface

Connect the evaluation board to the computer by a parallel port cable.

Run STLED316S_GUI.exe and then power up the demo board.

Figure 4.

Default GUI setting

The setting of GUI when it is first run is the default setting of STLED316S upon power-up.

The number of 7-segment LED on evaluation board is six. The DISPLAY MODE (red circle

in Figure 4 ) should be modified from the default value of 4-digit, 8-segment to 6-digit, 8-

segment. By default also, DISPLAY is OFF. Modify DISPLAY ON/OFF (red circle in Figure 4)

setting to ON.