UM1510 datasheet(23/69 Pages) STMICROELECTRONICS

23 / 69 page

UM1510

Running the demonstration

Doc ID 022713 Rev 1

23/69

Figure 16.

SD card removal

2.4

Demo applications

The following section provides a detailed description of each part of the demonstration.

Note:

In the demonstration, the core runs at HCLK = 32 MHz.

Four LEDs (LD1, LD2, LD3 and LD4) flash throughout the demonstration at a frequency

depending on the core clock.

2.4.1

Product presentation

This part of the demo is dedicated to the listing of all the embedded STM32L152ZD(T6)

peripherals and features. This presentation of the microcontroller is made with a set of

slides accompanied by a speech. Each slide is associated with a dedicated speech (wave

file). When the user starts the product presentation, the first slide appears and the

corresponding speech starts. Once the speech is finished, the second slide is displayed

accompanied by its speech, and so on until the last slide.

When the Product presentation menu is selected, the message shown in Figure 17 is

displayed on the LCD screen.

Figure 17.

Product presentation is ready to start

Err: SDCard Removed

Please check SD Card

Press JoyStick UP to

Restart the demo...

Put the Headphone into

When presentation

starts use RIGHT and

LEFT to go to the

next/previous slide

and SEL to exit

your ears and press

SEL to start

UM1510 Datasheet(PDF) 23 Page - STMicroelectronics