UM1547 datasheet(23/51 Pages) STMICROELECTRONICS

23 / 51 page

DocID023232 Rev 5

23/51

UM1547

AT command list

3.27

LocalName

The LocalName command is used to set the name of the device to the name that is reported

during device discoveries. By default, the ATn FW interface uses “Amped UP!”. Changing

the name using this command does not permanently change the local name.

3.27.1

Syntax

AT+AB LocalName [name]

Where [name] is a string for the new local name (up to 20 characters). The space character

is allowed; the name is assumed to be all text up to the end of the command.

3.27.2

Responses

If the operation is successful, the response is:

AT-AB LocalNameOk

3.28

PassKeyAccept

This command is used to accept the MITM confirmation code, automatically generated

during the bonding phase. After setting var55 = true, it is possible to use this command to

complete the paring automatically

3.28.1

Syntax

AT+AB PassKeyAccept [y/n]

Example for confirmation:

AT+AB PassKeyAccept y

Example for denying confirmation:

AT+AB PassKeyAccept n

3.28.2

Responses

If the operation is successful the module enters in bypass mode and it is automaticaly

bonded or connected.

3.29

PortDisconnect

The PortDisconnect command is used to terminate a connection with the remote device port

handle. it is supported by AT FW.

3.29.1

Syntax

AT+AB PortDisconnect

3.29.2

Responses

If the operation is successful, the response is:

AT+AB ConnectionDown

UM1547 Datasheet(PDF) 23 Page - STMicroelectronics

UM1547 Datasheet(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Datasheet Download

Link URL