RN41 datasheet(16/28 Pages) MICROCHIP

16 / 28 page

RN41/RN41N

DS50002280A-page 16

 2014 Microchip Technology Inc.

The R&TTE Compliance Association provides guid-

ance on modular devices in document Technical

Guidance Note 01 available at

http://www.rtteca.com/html/download_area.htm.

3.3.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the RN41/

RN41N module must follow CE marking requirements.

The “R&TTE Compliance Association Technical Guid-

ance Note 01” provides guidance on final product CE

marking.

3.3.2

ANTENNA REQUIREMENTS

From R&TTE Compliance Association document Tech-

nical Guidance Note 01:

Provided the integrator installing an assessed

radio module with an integral or specific antenna

and installed in conformance with the radio mod-

ule manufacturer’s installation instructions

requires no further evaluation under Article 3.2

of the R&TTE Directive and does not require fur-

ther involvement of an R&TTE Directive Notified

Body for the final product. [Section 2.2.4]

The European Compliance Testing listed in Table 3-2

was performed using the antenna types listed in

Table 2-3.

3.3.3

HELPFUL WEB SITES

A document that can be used as a starting point in

understanding the use of Short Range Devices (SRD)

in Europe is the European Radio Communications

Committee (ERC) Recommendation 70-03 E, which

can be downloaded from the European Radio Commu-

nications Office (ERO) at: http://www.ero.dk/.

Additional helpful web sites are:

• Radio and Telecommunications Terminal Equip-

ment (R&TTE):

http://ec.europa.eu/enterprise/rtte/index_en.htm

• European Conference of Postal and Telecommu-

nications Administrations (CEPT):

http://www.cept.org/

• European Telecommunications Standards Insti-

tute (ETSI):

http://www.etsi.org

• European Radio Communications Office (ERO):

http://www.ero.dk/

• The Radio and Telecommunications Terminal

Equipment Compliance Association (R&TTE CA):

http://www.rtteca.com/

Note:

To maintain conformance to the testing

listed in Table 3-1, the module shall be

installed in accordance with the installa-

tion instructions in this data sheet and

shall not be modified.

When integrating a radio module into a

completed

product

the

integrator

becomes the manufacturer of the final

product and is therefore responsible for

demonstrating compliance of the final

product with the essential requirements of

the R&TTE Directive.

RN41 Datasheet(PDF) 16 Page - Microchip Technology

RN41 Datasheet(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL