Electronic Components Datasheet Search
  English  ▼

X  

ATR4255P Datasheet(PDF) 6 Page - ATMEL Corporation

Part # ATR4255P
Description  FM Double-conversion System
PDF  34 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  ATMEL [ATMEL Corporation]
Direct Link  http://www.atmel.com
Logo ATMEL - ATMEL Corporation

ATR4255P Datasheet(HTML) 6 Page - ATMEL Corporation

Back Button ATR4255P Datasheet HTML 2Page - ATMEL Corporation ATR4255P Datasheet HTML 3Page - ATMEL Corporation ATR4255P Datasheet HTML 4Page - ATMEL Corporation ATR4255P Datasheet HTML 5Page - ATMEL Corporation ATR4255P Datasheet HTML 6Page - ATMEL Corporation ATR4255P Datasheet HTML 7Page - ATMEL Corporation ATR4255P Datasheet HTML 8Page - ATMEL Corporation ATR4255P Datasheet HTML 9Page - ATMEL Corporation ATR4255P Datasheet HTML 10Page - ATMEL Corporation Next Button
Zoom Inzoom in Zoom Outzoom out
 6 / 34 page
background image
6
4883B–AUDR–01/06
ATR4255P
3.2
Test Mode
A special test mode is implemented for final production test only. This mode is activated by set-
ting bit 9 to “1”. This mode is not intended to be used in customer applications. For normal
operation, bit 9 has to be set to “0”. Bits 18 to 30 are deactivated in normal operation mode.
3.3
VCO
An oscillator circuit is implemented to build a VCO as proposed in the application schematic. The
VCO frequency is used to generate the LO frequency of the 1
st mixer stages. The control voltage
of the VCO is usually generated by the PLL circuit ATR4256. The VCO signal is provided at the
buffered output pin 16 to be fed to the PLL circuit.
3.4
FM RF-AGC
The FM RF-AGC circuit includes a wideband level detector at the input, pin 1, of the FM mixer,
and an in-band level detector at the output of the FM IF amplifier (pin 30). The outputs of these
level detectors are used to control the current into the pin diode (see Figure 3-1) in order to limit
the signal level at the FM mixer input and the following stages. The maximum pin diode current
is determined by R115 and the time constant of the AGC control loop can be adjusted by chang-
ing the value of C111.
The AGC threshold level at the input of the FM mixer can be adjusted by bits 64 and 65 as
shown in Table 3-3. The in-band AGC threshold referred to the FM mixer input (pin 1, pin 2)
depends on the gain of the FM IF amplifier and can be adjusted using bits 89 to 91.
Figure 3-1.
FM RF-AGC Bit 92
Table 3-2.
Test Mode
Mode
Bit 9
Normal operation
0
Test mode
1
AGC
B92
PIN Diode
VS
Pin 42
Pin 5
C111
R115



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com