MCP1643 RGB LED DRIVER

DEMONSTRATION BOARD

USER’S GUIDE

 2016 Microchip Technology Inc.

DS50002437A-page 7

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MCP1643 RGB LED Driver Demonstration Board. Items discussed in this chapter

include:

• Document Layout

• Conventions Used in This Guide

• Recommended Reading

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP1643 RGB LED Driver Demonstration

Board. The document is organized as follows:

• Chapter 1. “Product Overview” – Important information about the MCP1643

RGB LED Driver Demonstration Board.

• Chapter 2. “Installation and Operation” – Includes instructions on installing and

getting started with the MCP1643 RGB LED Driver Demonstration Board.

• Chapter 3. “Flow Charts” - Contains flow charts for the MCP1643 RGB LED

Driver Demonstration Board.

• Appendix A. “Schematics ad Layouts” – Shows the schematic and layout

diagrams for the MCP1643 RGB LED Driver Demonstration Board.

• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the

MCP1643 RGB LED Driver Demonstration Board board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level

of the document.

Select the Help menu, and then Topics to open a list of available online help files.