© 2015 Bel Power Solutions, Inc.

North America

+1-866.513.2839

Asia-Pacific

+86.755.29885888

Europe, Middle East

+353 61 225 977

tech.support@psbel.com

BCD20034-G_AE



RoHS lead free solder and lead solder exempted

products are available





Universal input voltage range (90-264 VAC) with PFC



1U or 2U height configurations



Droop current share with ORing FETs





Standby voltage of 12 VDC @ 0.5 A



Overtemperature, overload, and overvoltage

protection



Status LEDs: AC OK, DC OK, Overtemperature



FNP850-12 model has airflow direction from

front-to-rear or from rear-to-front (-12R model)



ON/OFF Enable switch - shuts OFF Vo1; Vaux and

fan are operational.

The FNP600/850/1000 power factor corrected (PFC)

front ends provide (depending on model) either a 12

VDC or a 48 VDC output for telecom, datacom, and

other distributed power applications. Their small 1U by

2U size allows for configurations of either height in hot-

swap redundant systems while their internal fan and

cooling design permits wide use with reliable operation.

Status is provided with front panel LEDs, logic signals,

speed, and on the 12 VDC models it allows for adjusting

the output voltage from 7 to 12 VDC. This powerful

feature allows the same power supply to be used in

various applications where bus voltages driving isolated

dc-dc converters and POL regulators may be different.

Also, the FNP850-12R is uniquely designed with airflow

from the rear of the power supply to the front. This

airflow direction supports those critical applications

where

space

limitations

and/or

higher

ambient

temperatures near the rear of the rack system, prohibit

the discharge of higher temperature airflow from regular

front-to-rear cooled power supplies.

The

FNP600/850/1000's

meet

international

safety

requirements and are CE marked to the Low Voltage

Directive (LVD).



Telecom



Datacom



Distributed Power Systems