1104LS series

Handling precaution

【Other precautions】

1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability.

However, the performance may vary depending on usage conditions

2. Absolute maximum ratings are set to prevent LED lamps from failing due to excess

stress( temperature, current, voltage, etc.). Usage conditions must not exceed the ratings for a

moment, nor do reach one item of absolute maximum ratings simultaneously.

3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage

conditions should be taken into account for designing. ( Derating of TYP., MAX Forward voltage,

etc.)

4. Please insert protective resistors into the circuit in order to stabilize LED operation and to prevent

the device from igniting due to excess current.

5. Please check the actual performance in the assembly because the specification sheets are described

for LED device only.

6. Please refrain from looking directly at the light source of LED at high output, as it may harm your

vision.

7. The products are designed to operate without failure in recommended usage conditions. However,

please take the necessary precautions to prevent fire, injury, and other damages should any

malfunction or failure arise.

8. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales

staff beforehand when exceptional quality and reliability are required, and the failure or malfunction

of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport

equipment, medical applications, nuclear reactor control systems and so on).

9. When there is a process of supersonic wave welding etc. after mounting the product, there is a

possibility of affecting on the reliability of junction part in package (junction part of die bonding and

wire bonding). Please make sure there is no problem before using.

10. The formal specification sheets shall be valid only by exchange of documents signed by both parties.

Page 9

2017.11.20