SSD1306 datasheet(46/65 Pages) ETC2

Part #	SSD1306

Description	128 x 64 Dot Matrix OLED/PLED Segment/Common Driver with Controller

PDF	65 Pages

Scroll/Zoom	100%

Manufacturer	ETC2 [List of Unclassifed Manufacturers]

Direct Link

Logo

46 / 65 page

Solomon Systech

Apr 2008 P 46/59

Rev 1.1

SSD1306

10.2.3 Deactivate Scroll (2Eh)

This command stops the motion of scrolling. After sending 2Eh command to deactivate the scrolling action,

the ram data needs to be rewritten.

10.2.4 Activate Scroll (2Fh)

This command starts the motion of scrolling and should only be issued after the scroll setup parameters have

been defined by the scrolling setup commands :26h/27h/29h/2Ah . The setting in the last scrolling setup

command overwrites the setting in the previous scrolling setup commands.

The following actions are prohibited after the scrolling is activated

RAM access (Data write or read)

Changing the horizontal scroll setup parameters

10.2.5 Set Vertical Scroll Area(A3h)

This command consists of 3 consecutive bytes to set up the vertical scroll area. For the continuous vertical

scroll function (command 29/2Ah), the number of rows that in vertical scrolling can be set smaller or equal to

the MUX ratio.

SSD1306 Datasheet(PDF) 46 Page - List of Unclassifed Manufacturers