ATMEGA640 datasheet(322/436 Pages) MICROCHIP

322 / 436 page

322

ATmega640/V-1280/V-1281/V-2560/V-2561/V [DATASHEET]

DS40002211A

29.6.16

ATmega2560/2561 Boot Loader Parameters

In Table 29-13 through Table 29-15, the parameters used in the description of the Self-Programming are given.

Note:

1. The different BOOTSZ Fuse configurations are shown in Figure 29-2 on page 312.

Note:

1. For details about these two section, see “NRWW – No Read-While-Write Section” on page 311 and “RWW – Read-

While-Write Section” on page 311.

Notes: 1. Z0: should be zero for all SPM commands, byte select for the (E)LPM instruction.

2. See “Addressing the Flash During Self-Programming” on page 314 for details about the use of Z-pointer during

Self-Programming.

3. The Z-register is only 16 bits wide. Bit 16 is located in the RAMPZ register in the I/O map.

Table 29-13. Boot Size Configuration, ATmega2560/2561(1)

512 words

0x00000 - 0x1FDFF

0x1FE00 - 0x1FFFF

0x1FDFF

0x1FE00

1024 words

0x00000 - 0x1FBFF

0x1FC00 - 0x1FFFF

0x1FBFF

0x1FC00

2048 words

0x00000 - 0x1F7FF

0x1F800 - 0x1FFFF

0x1F7FF

0x1F800

4096 words

0x00000 - 0x1EFFF

0x1F000 - 0x1FFFF

0x1EFFF

0x1F000

Table 29-14. Read-While-Write Limit, ATmega2560/2561

Section(1)

Pages

Address

Read-While-Write section (RWW)

992

0x00000 - 0x1EFFF

No Read-While-Write section (NRWW)

0x1F000 - 0x1FFFF

Table 29-15. Explanation of different variables used in Figure 29-3 on page 314 and the mapping to the Z-pointer,

ATmega2560/2561

Variable

Corresponding

Z-value(2)

Description(1)

PCMSB

Most significant bit in the Program Counter. (The Program Counter is 17 bits

PC[16:0]).

PAGEMSB

Most significant bit which is used to address the words within one page (128

words in a page requires seven bits PC [6:0]).

ZPCMSB

Z17:Z16(3)

Bit in Z-pointer that is mapped to PCMSB. Because Z0 is not used, the

ZPCMSB equals PCMSB + 1.

ZPAGEMSB

Bit in Z-pointer that is mapped to PCMSB. Because Z0 is not used, the

ZPAGEMSB equals PAGEMSB + 1.

PCPAGE

PC[16:7]

Z17(3):Z8

Program Counter page address: Page select, for Page Erase and Page

Write.

PCWORD

PC[6:0]

Z7:Z1

Program Counter word address: Word select, for filling temporary buffer

(must be zero during Page Write operation).

ATMEGA640 Datasheet(PDF) 322 Page - Microchip Technology

ATMEGA640 Datasheet(HTML) 322 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL