ATMEGA640 datasheet(13/436 Pages) MICROCHIP

13 / 436 page

ATmega640/V-1280/V-1281/V-2560/V-2561/V [DATASHEET]

DS40002211A

7.4.1

SREG – AVR Status Register

The AVR Status Register – SREG – is defined as:

• Bit 7 – I: Global Interrupt Enable

The Global Interrupt Enable bit must be set for the interrupts to be enabled. The individual interrupt enable control

is then performed in separate control registers. If the Global Interrupt Enable Register is cleared, none of the inter-

rupts are enabled independent of the individual interrupt enable settings. The I-bit is cleared by hardware after an

interrupt has occurred, and is set by the RETI instruction to enable subsequent interrupts. The I-bit can also be set

and cleared by the application with the SEI and CLI instructions, as described in the “Instruction Set Summary” on

page 404.

• Bit 6 – T: Bit Copy Storage

The Bit Copy instructions BLD (Bit LoaD) and BST (Bit STore) use the T-bit as source or destination for the oper-

ated bit. A bit from a register in the Register File can be copied into T by the BST instruction, and a bit in T can be

copied into a bit in a register in the Register File by the BLD instruction.

• Bit 5 – H: Half Carry Flag

The Half Carry Flag H indicates a Half Carry in some arithmetic operations. Half Carry Is useful in BCD arithmetic.

See the “Instruction Set Summary” on page 404 for detailed information.

• Bit 4 – S: Sign Bit, S = N

 V

The S-bit is always an exclusive or between the Negative Flag N and the Two’s Complement Overflow Flag V. See

the “Instruction Set Summary” on page 404 for detailed information.

• Bit 3 – V: Two’s Complement Overflow Flag

The Two’s Complement Overflow Flag V supports two’s complement arithmetics. See the “Instruction Set Sum-

mary” on page 404 for detailed information.

• Bit 2 – N: Negative Flag

The Negative Flag N indicates a negative result in an arithmetic or logic operation. See the “Instruction Set Sum-

mary” on page 404 for detailed information.

• Bit 1 – Z: Zero Flag

The Zero Flag Z indicates a zero result in an arithmetic or logic operation. See the “Instruction Set Summary” on

page 404 for detailed information.

• Bit 0 – C: Carry Flag

The Carry Flag C indicates a carry in an arithmetic or logic operation. See the “Instruction Set Summary” on page

404 for detailed information.

7.5

General Purpose Register File

The Register File is optimized for the AVR Enhanced RISC instruction set. In order to achieve the required perfor-

mance and flexibility, the following input/output schemes are supported by the Register File:

•

One 8-bit output operand and one 8-bit result input

•

Two 8-bit output operands and one 8-bit result input

Bit

765432

0x3F (0x5F)

SREG

Read/Write

R/W

Initial Value

000000

ATMEGA640 Datasheet(PDF) 13 Page - Microchip Technology

ATMEGA640 Datasheet(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL