| Electronic Components Datasheet Search |
|
STV82X8 Datasheet(PDF) 33 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV82X8 Datasheet(HTML) 33 Page - STMicroelectronics |
|
33 / 157 page ![]() 33/157 STV82x8 Dedicated Digital Signal Processor (DSP) ● In Independent mode, the volume for the Left and Right channels for Loudspeakers or Headphone is controlled independently. 4.14 Soft Mute Control The Digital Soft Mute is applied smoothly (20 ms for 120 dB range) to avoid any switch noise on output. It is available on all output channels pairs: ● S/PDIF channel (Left/Right) ● SCART channels (Left/Right) ● Loudspeakers channels (Left/Right) ● Center ● Subwoofer ● Headphone/Surround channels (Left/Right) Another soft mute (analog) is also available on each DAC output. 4.15 Beeper The beeper is used to generate a tone on the Loudspeakers or/and Headphone outputs. The beeper sound (square wave) is added to the audio signal which is attenuated by 20 dB. The beep sound amplitude includes a smooth attack and decay to avoid any parasitic noise when starting and stopping. It can be used for various applications such as beep sounds for remote control, alarm clock or other features. The Beeper operates in one of two modes: ● Pulse mode (beep applications): A tone with a programmable short duration (0.1, 0.25, 0.5 and 1.0 s) is generated. Afterwards, the beeper is automatically disabled and the output is switched back to the audio signal, see Figure 21. ● Continuous mode (alarm application): A tone with a programmable long duration is generated. Its start and stop controls must be programmed by I²C, see Figure 22. The Beeper function is enabled by setting the BEEPER_ON bit in register BEEPER_ON. Beeper parameters are controlled in register BEEPER_MODE. The beeper tone level and frequency are programmed in register BEEPER_FREQ_VOL. The level (or volume) ranges between 0 dB and -93 dB in steps of 3 dB and the tone frequency ranges between 62.2 Hz and 8 kHz in steps of 1 octave. Figure 20: Differential Balance 100% Mute 200h 1FFh I²C Control (10 bits) 000h |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |