Document Number: 002-30704 Rev. *C

Page 3 of 38

CYUSB3015

CYUSB3016

CYUSB3017

More Information

Cypress provides a wealth of data at www.cypress.com to help you to select the right <product> device for your design, and to help

you to quickly and effectively integrate the device into your design.

■ Overview: USB Portfolio, USB Roadmap

■ USB 3.0 Product Selectors: SX3, FX3, FX3S, CX3, GX3, HX3

■ Application notes: Cypress offers a large number of USB

application notes covering a broad range of topics, from basic

to advanced level. Recommended application note for getting

started with SX3 is:

❐ AN231295 - Getting started with EZ-USB SX3

The following Application notes can be used for reference only.

❐ AN75705 - Getting Started with EZ-USB FX3

❐ AN76405 - EZ-USB FX3 Boot Options

❐ AN70707 - EZ-USB FX3/FX3S Hardware Design Guidelines

and Schematic Checklist

❐ AN65974 - Designing with the EZ-USB FX3 Slave FIFO

Interface

❐ AN75779 - How to Implement an Image Sensor Interface with

EZ-USB FX3 in a USB Video Class (UVC) Framework

❐ AN86947 - Optimizing USB 3.0 Throughput with EZ-USB

FX3

❐ AN84868 - Configuring an FPGA over USB Using Cypress

EZ-USB FX3

❐ AN73609 - EZ-USB FX2LP/ FX3 Developing Bulk-Loop

Example on Linux

■ Development Kits:

❐ CYUSB3KIT-004, EZ-USB SX3 SuperSpeed Explorer Kit

■ Models: IBIS

EZ-USB SX3 Configuration Utility

EZ-USB SX3 Configuration Utility is a graphical user application that allows users to configure the EZ-USB SX3 USB 3.0 Device

controller variants.

The user can completely configure the EZ-USB SX3 based on the system requirements. The tool supports configuration of SX3-UVC

and SX3-Data variants.

Users can configure the following using EZ-USB Configuration Utility for each variant:

■ SX3-UVC (CYUSB3017 - variant supporting UVC and UAC)

❐ USB descriptor settings

• Vendor ID

• Product ID

• String descriptors (Product, Manufacturer, Serial Number)

• Remote wakeup configuration

❐ GPIO configuration

❐ Debug interface

❐ FPGA, HDMI receiver, or ISP configuration

❐ DMA buffer configuration

❐ UVC video formats and resolutions

❐ Camera terminal controls

❐ Processing unit controls

❐ Extension unit controls

❐ Image sensor / HDMI RX configuration

❐ Audio interface configuration

■ SX3-Data (CYUSB3015, CYUSB3016 - variant supporting

USB vendor class)

❐ USB descriptor settings

• Vendor ID

• Product ID

• String descriptors (Product, Manufacturer, Serial Number)

• Remote wakeup configuration

❐ GPIO configuration

❐ Debug interface

❐ FPGA configuration

❐ Buffer configuration

Users can also program the created configuration into the EX-USB SX3 using the programming tool integrated into the utility. This

utility allows the user to save the created configuration. It also allows users to load the selected configuration. The utility is supported

across Windows, Linux and Mac OSX platforms.