Note: Tolerance ± .015 [.38] unless noted. Dimensions in brackets [ ] are millimeters.

32º

32º

OFF

ON

2.075

[52.71]

MAX.

.690

[17.53]

.240

[6.10]

1.687

[42.85]

IAG/IUG/IEG/CEG/LEG

O

N

O

F

F

1.515

[38.48]

MAX.

O

N

O

F

F

2.265

[57.53]

MAX.

O

N

O

F

F

O

N

O

F

F

3.015

[76.58]

MAX.

1.660

[42.17] 1.050

[26.68]

4X

.156

[3.96]

+.25

-.00

+.010

-.000

2X

.625

15.88

[

[

.750

[19.05]

.750

[19.05]

.750

[19.05]

.750

[19.05]

.750

[19.05]

.750

[19.05]

Panel Mounting Detail: Tolerance for Mtg. ±.005 [.13] unless noted.

*See Single Pole Mounting Detail for hole sizes and locations. LEG type units are

only available in one or two poles.

(Optional: Handle may be

located in Pole 1 instead

of Pole 2)

Two Pole*

Three Pole*

Four Pole*

Two Pole*

Three Pole*

Four Pole*

1.530

[38.86]

.230

[5.84]

LEG Type Units Require

Screw Terminals

MULTI-POLE CIRCUIT PROTECTORS

(IAG/IUG/IEG/CEG/LEG)

Two Pole Protectors

An assembly consisting of two single pole units, having their trip

mechanisms internally coupled and with a single toggle handle,

forms the IEG11 with quick-connect D.I.N.-style terminals.

Individual poles may differ in ratings, delays and internal

connections. An auxiliary switch may be included in either or

both poles, allowing you to mix SELV and hazardous voltages.

Rugged screw-type terminals can be provided, in which case the

designation would be IEG66. The IEGH offers a toggle handle for

each pole. LEG type units are avavailable only in one or two pole

configurations.

Three Pole and Four Pole Protectors

The three pole construction consists of three single pole units

assembled with an internal mechanical interlock which actuates

all units simultaneously. A single toggle handle operates all three

poles for quick and convenient control, or if preferred, a handle

per pole is available. The four pole construction consists of four

single pole units assembled with an internal mechanical

interlock which actuates all units simultaneously. A double

toggle handle operates all four poles. The individual poles need

not have identical characteristics and any series trip pole may

have an auxiliary switch. If screw-type terminals are required,

the breaker designation will be IEG666 for a three pole version

and IEG6666 for a four pole version.

Protector poles are numbered consecutively when viewed from

the terminal side, with the ON position up, starting with Pole #1

on the left side and proceeding to the right.

IAG/IUG/IEG/CEG/LEG Multi-Pole Circuit Breakers

IAG Series - Poles

http://airpax.sensata.com

101