TSI721 datasheet(7/67 Pages) RENESAS

7 / 67 page

Tsi721 Datasheet

April 4, 2016

Integrated Device Technology

Object Size Notation

•A byte is an 8-bit object.

•A PCIe word is a 16-bit object.

•A PCIe doubleword (DW) is a 32-bit object.

•An S-RIO word is a 32-bit object.

•An S-RIO doubleword (Dword) is a 64-bit object.

Numeric Notation

• Hexadecimal numbers are denoted by the prefix 0x (for example, 0x04).

• Binary numbers are denoted by the prefix 0b (for example, 0b010).

• Registers that have multiple iterations are denoted by {x..y} in their names; where x is first register and address, and y is the

last register and address. For example, REG{0..1} indicates there are two versions of the register at different addresses:

REG0 and REG1.

Symbols

Revision History

April 4, 2016

• Added GCLV, GILH, and GILV part numbers to Ordering Information

May 5, 2014

• Updated the description of the VIN_DIFF parameter in Table 32

December 3, 2012

• Updated Ordering Information with production ordering numbers

February 28, 2012

• Added a footnote to Absolute Maximum Ratings, and removed the minimum rating for TJN from the same section

• Added TJN and a footnote to Recommended Operating Conditions

December 16, 2011

• Updated the minimum and maximum values for AVDD10 in Recommended Operating Conditions

• Added Power Consumption data

• Changed the Moisture Sensitivity Level to 4

This symbol indicates important configuration information or suggestions.

This symbol indicates procedures or operating levels that may result in misuse or damage to the

device.

TSI721 Datasheet(PDF) 7 Page - Renesas Technology Corp