CS5535 datasheet(539/555 Pages) NSC

539 / 555 page

Revision 0.8

539

www.national.com

Electrical Specifications (Continued)

6.3.5

IDE Signals in Flash Mode

The signals detailed in this sub-section use an “IDE” buffer

type. For a detailed explanation of buffer types, see Table

2-4 "Buffer Type Characteristics" on page 28.

In this subsection, unless otherwise noted:

• All timing specifications are specified under the oper-

ating conditions listed in Table 6-3 on page 526 (i.e.,

VCORE and VCORE_VSB = All; VIO and VIO_VSB = All;

TCASE = All).

• Signals are referenced to LPC_CLK.

• Signal parameters are defined in Figure 6-2 "AC Refer-

ence Timing and Test Definition" on page 530.

Table 6-13. Flash Timing Parameters

Signal

Parameter

Min

Max

Units

Comment/Condition

FLASH_CS[3:0]#,

FLASH_RE#, FLASH_WE,

FLASH_ALE,

FLASH_CLE,

FLASH_AD[9:0],

FLASH_IO[7:0]

signals and I/Os in Flash

output mode

tVAL

Note 1.

FLASH_IO[7:0] signals

and I/Os in Flash input

mode except

FLASH_IOCHRDY

tSETUP

8NA

tHOLD

0NA

FLASH_IOCHRDY

Async Input

No clock reference.

Note 1. tVAL min times with load of: 10 pF cap to ground.

tVAL max times with load of: 50 pF cap to ground.

CS5535 Datasheet(PDF) 539 Page - National Semiconductor (TI)

CS5535 Datasheet(HTML) 539 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL