CS5535 datasheet(538/555 Pages) NSC

538 / 555 page

www.national.com

538

Revision 0.8

Electrical Specifications (Continued)

Figure 6-7. IDE UltraDMA Data In Timing

Table 6-12. IDE UltraDMA Data In Timing Parameters

Signal

Parameter

Min

Max

Units

Comment/Condition

IDE_DACK0#,

IDE_HDMA_RDY,

IDE_STOP,

IDE_IOW0

tVAL

In Ultra DMA/33 mode, the

IDE_IOR0# signal is redefined as

IDE_HDMA_RDY.

Note 1 and Note 2.

IDE_DDMA_DS

Async Input

In Ultra DMA/33 mode, the

IDE_RDY0 signal is redefined as

IDE_DDMA_DS.

Note 3.

IDE_DATA[15:0]

Sync to

IDE_DDMA_DS

see Note

Note 3.

IDE_DREQ0#

Async Input

No clock reference. Note 4.

IDE_IRQ0

Async Input

Note 4 and Note 5.

Note 1. Per the ATA/ATAPI-5 spec, these signals utilize Output Reference Timing (see Figure 6-3 on page 531) relative to

IDE_IOR0# and IDE_IOW0#. However, the IDE Controller uses the MHZ66_CLK edges to make output changes,

that when taken together, meet all the timing requirements of the referenced spec. Therefore, tVAL times are spec-

ified and tested relative to the MHZ66_CLK.

Note 2. tVAL min times with load of: 15 pF cap to ground.

tVAL max times with load of: 40 pF cap to ground.

Note 3. These signals use Input Reference Timing (see Figure 6-4 on page 531). Figure 6-7 illustrates their relationship

and specified setup and hold times.

Note 4. Per the ATA/ATAPI-5 spec, these signals utilize Input Reference Timing (see Figure 6-4 on page 531) relative to

IDE_IOR0#. However, the IDE Controller samples the inputs with the MHZ66_CLK at the appropriate points in time

to meet all the timing requirements of the referenced spec.

Note 5. For IDE_IRQ0, GPIO2 configured: AUX_IN and Input Enable = 1; Output Enable, AUX_OUT_1, and AUX_OUT_2

= 0.

tSETUP = 5 ns

tHOLD = 5 ns

IDE_DEVICE_DATA_STROBE

IDE_DATA[15:0]

CS5535 Datasheet(PDF) 538 Page - National Semiconductor (TI)

CS5535 Datasheet(HTML) 538 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL