| Electronic Components Datasheet Search |
|
TDA9614H Datasheet(PDF) 19 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
TDA9614H Datasheet(HTML) 19 Page - NXP Semiconductors |
|
19 / 60 page ![]() 1995 Mar 21 19 Philips Semiconductors Preliminary specification Audio processor for VHS hi-fi and linear audio TDA9614H Table 19 Bits HSL and HSR Normally the headphone output signal is set by the output selection OSL, OSR and OSN (see Table 17). Furthermore three independent selections can be made: LEFT hi-fi channel, RIGHT hi-fi channel (language selection) and NORMAL (e.g. monitoring an audio dubbing recording). These headphone selections are also active for the VU meter output (DC out), unless bit DCS = 1. Table 20 Bit DCS Note 1. The signal at DC out (DCOUTL and DCOUTR; pins 23 and 24) is normally the signal which can be listened to by the headphone. For use in concepts with digital AGC (using the DC output signal to control the left and right volume settings), an independent selection to hi-fi stereo can be made. Table 21 Bit RFCM Note 1. The audio signal at RF converter out (a mono version of the signal selected with the output select with overload AGC) can be independently muted. Table 22 Bits LOS1 and LOS0; note 1 Note 1. With the line output select some special connections can be made overruling the output select (OSL, OSR and OSN), e.g. for connecting a decoder box (for a pay-TV channel) to a television set via the VCR. HSL HSR MODE DESCRIPTION 1 1 outsel Headphone signal set by the output selection [por]. 1 0 left LEFT at both headphone out left and right. 0 1 right RIGHT at both headphone out left and right. 0 0 normal NORMAL (is linear audio) at both headphone outputs. DCS MODE DESCRIPTION(1) 0 headphone DC output is set by Headphone Select [por]. 1 stereo DC output is hi-fi stereo. RFCM MODE DESCRIPTION(1) 0 − [por] 1 mute(1) RF converter output signal muted LOS1 LOS0 MODE DESCRIPTION 0 0 Outsel Line output selection is set by output select function [por]. 0 1 Normal Linear audio is connected to line output. 1 0 Ext2 Ext2 input is directly connected to line output. 1 1 Ext3 Ext3 input is directly connected to line output. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |