PCM1608 datasheet(27/46 Pages) TI2

27 / 46 page

www.ti.com

PCM1608

SBAS164B – DECEMBER 2000 – REVISED JULY 2005

B15

B14

B13

B12

B11

B10

R/W

IDX6

IDX5

IDX4

IDX3

IDX2

IDX1

IDX0

INC

REG6

REG5

REG4

REG3

REG2

REG1

REG0

R/W – Read/Write Mode Select

When R/W = 0, a write operation is performed.

When R/W = 1, a read operation is performed.

Default value: 0

INC – Auto-Increment Read Control

This bit is read/write.

Default value: 0

INC = 0

Auto-increment read disabled (default)

INC = 1

Auto-increment read enabled

The INC bit is used to enable or disable the auto-increment read feature of the serial control interface. See the

Serial Control Interface section of this data sheet for details regarding auto-increment read operation.

REG[6:0] – Read Register Index

These bits are read/write.

Default value: 01h

The REG[6:0] bits are used to set the index of the register to be read when performing the single-register read

operation. In the case of an auto-increment read operation, the REG[6:0] bits indicate the index of the last

during an auto-increment read operation, the REG[6:0] bits would be set to 06h. See the Serial Control Interface

section of this data sheet for details regarding the single-register and auto-increment read operations.

PCM1608 Datasheet(PDF) 27 Page - Texas Instruments

PCM1608 Datasheet(HTML) 27 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL