TG-F2289-E04

AM3000 Series MICRO FLOWMETER

14

TOKYO KEISO CO., LTD.

4. Magnet strainer (Model AM3000/MG)

Iron particles in liquids may be attracted by the magnet in the float and cause the flowmeter to malfunction. To prevent this, install a

magnet strainer at the inlet of the flowmeter. The 100 mesh strainer is available as standard (200 mesh is optional).

● Standard specification

Nominal size

: 1/4, 3/8, 1/2

Fluid pressure

: Max. 1.5 MPa

Fluid temperature : Max. 200℃

Filter

: 100 mesh (standard)

200 mesh (option)

Material

: SUS304, SUS316

5. Purge set

Combined with a constant flow valve, the AM3000 micro flowmeter keeps flow rates constant even when the primary or secondary

pressure fluctuates. For details, see TECHNICAL GUIDANCE of the C series.

6. Panel mounting type (Model AM3000/PN)

The panel mounting type facilitates mounting onto other instruments.

The locations and dimensions of holes for fixing screws and the dimensions of the panel are shown below.

The fixing screws are to be provided by the customer. Select ones appropriate for the thickness of the panel.

●Dimensions of the magnet strainer

N N

S

S

（75）

IN

OUT

30±0.5

30±0.5

45

4-Ø4.5

32.5

4-M4×6

Panel

43

4-M4

●Panel mounting (side view)

●Panel mounting (front view)

●Panel cut dimensions

Note: Metal fixtures should not be used for supporting the flowmeter.

Support the flowmeter with other tools so as not to apply any force to the piping tube and wiring connection.