ST18952 datasheet(38/67 Pages) STMICROELECTRONICS

38 / 67 page

38/66

ST18952

SCR writes must be made when the SIO is disabled (SEN bit of the SIO enable register is

‘0’)SMS:

SSM

SIO Frame synchro mode

The SFS frame synchro is generated one clock cycle before the first data of the frame

(delayed mode) when SSM = ‘0’ (reset value) or when first data is transmitted/received

(non-delayed mode) when SSM = ‘1’.

SWN(2:0)

SIO word number (SWN(2) = msb)

SWN determines the number of words inserted in the frame (up to 8). The coding is as

follows:

SWN = “0” -> 1 time slot

SWN = “1” -> 2 time slots

...

SWN = “7” -> 8 time slots

The reset value is SWN = “0”

STIE

SIO Transmit interrupt enable

•

When STIE = ‘1’, interrupt request generated on the STI output when STDE flag = ‘1’.

•

When STIE = ‘0’ (reset value), the STI output is disabled (‘1’)

SRIE

SIO Receive interrupt enable

•

When SRIE = ‘1’, interrupt request generated on SRI output when the SRDF flag = ‘1’.

•

When SRIE = ‘0’ (reset value), the SRI output is disabled (‘1’)

SMEM

SIO Microwire enable: Must be set to 0 (normal mode)

SLL

SIO Local loop

•

When SLL = ‘1’, the STD output is internally linked to the SRD input. This allows the

SIO behavior to be checked without providing data on the SRD input.

•

When SLL = ‘0’ (reset value), the SRD input is enabled

Bits 15-14

Unused and are read as ‘0’

Bit

Function

SMS

SIO Mode select: Must be set to 0 (normal mode)

ST18952 Datasheet(PDF) 38 Page - STMicroelectronics

ST18952 Datasheet(HTML) 38 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL