MAC7101 datasheet(5/710 Pages) FREESCALE

5 / 710 page

Features

MAC7100 Microcontroller Family Product Brief, Rev. 2

Preliminary

Freescale Semiconductor

– Protection violation flag

– 10,000 program / erase cycle endurance

– 15-year data retention

— 32 Kbyte data Flash EEPROM

– 16-bit wide memory accessed via peripheral bus interface

– Relocatable to page zero to provide data Flash boot operation

– State machine controlled program/erase operations

– Internal programming voltage generator

– Up to 8 protected sectors in the data Flash

– 10,000 program / erase cycle endurance

– 15-year data retention

— Up to 48 Kbyte RAM

– Single cycle accesses to RAM for byte, halfword, and word reads and writes

•

Interrupt Controller (INTC)

— 64 vectored interrupt sources

— 44 peripheral, 17 DMA, 1 software watchdog timer, 2 external sources

— 16 programmable interrupt priorities for every source, even in low-power modes

— Multiple level interrupt nesting, with hardware support for first nesting level

— Normal and Fast interrupt support

•

General purpose input/output

— Up to 144 port pins shared with peripherals

— All ports are 16 bits wide, with pins bidirectional and independently selectable

— Wake-up interrupt available on all port pins

•

Analog-to-Digital Converter(s) (ATD)

— One or two ATD modules

— 16 analog input channels per ATD module

— 10-bit resolution with

± 2 counts accuracy

—7

µS minimum conversion time

— Internal sample and hold circuitry

— Programmable input sample time for various source impedances

— Queued conversion sequences supported by eDMA controller

— Unused analog channels can be used as digital I/O

— External and on-chip sample triggers, including periodic triggering via the PIT module

— Synchronized sampling between ATD modules using external or on-chip triggers

•

CAN 2.0 software compatible modules (FlexCAN)

— Up to four CAN modules

— Full implementation of the CAN 2.0 protocol specification

— Programmable bit rate up to 1M bps

— Up to 32 flexible message buffers of 0 to 8 bytes data length for each module

— All message buffers configurable for either Rx/Tx

— Unused message buffer space can be used as general purpose RAM

— Supports standard or extended messages

— Time stamp, based on a 16-bit free-running counter

MAC7101 Datasheet(PDF) 5 Page - Freescale Semiconductor, Inc

MAC7101 Datasheet(HTML) 5 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL