SH7052 datasheet(350/919 Pages) RENESAS

350 / 919 page

324

Output Compare Register 10B (OCR10B): Output compare register 10B (OCR10B) is an 8-bit

readable/writable register that is constantly compared with free-running counter 10B (TCNT10B).

When AGCK is input with both values matching, CMF10B in timer status register 10 (TSR10) is

set to 1.

Bit:

Initial value:

R/W:

R/W

OCR10B is initialized to H'FF by a power-on reset, and in hardware standby mode and software

standby mode.

Reload Register 10C (RLD10C): Reload register 10C (RLD10C) is a 16-bit readable/writable

(ICR10A), the ICR10A capture value is shifted according to the multiplication factor set by bits

PIM1 and PIM0 in TIOR10 before being transferred to RLD10C. The contents of reload register

10C (RLD10C) are loaded when reload counter 10C (TCNT10C) reaches H'0001.

Bit:

Initial value:

R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W

RLD10C is initialized to H'0000 by a power-on reset, and in hardware standby mode and software

standby mode.

General Register 10G (GR10G): General register 10G (GR10G) is a 16-bit readable/writable

control register 10 (TIOR10). The GR10G value and free-running counter 10G (TCNT10G) value

are constantly compared, and when AGCK is input with both values matching, CMF10G in timer

status register 10 (TSR10) is set to 1.

Bit:

Initial value:

R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W

GR10G is initialized to H'FFFF by a power-on reset, and in hardware standby mode and software

standby mode.

SH7052 Datasheet(PDF) 350 Page - Renesas Technology Corp