SH7052 datasheet(723/919 Pages) RENESAS

723 / 919 page

697

• Bit 5—Erase Setup Bit 1 (ESU1): Prepares for a transition to erase mode. Do not set the

SWE1, PSU1, EV1, PV1, E1, or P1 bit at the same time.

Bit 5: ESU1

Description

Erase setup cleared

(Initial value)

Erase setup

[Setting condition]

When FWE = 1 and SWE1 = 1

• Bit 4—Program Setup Bit 1 (PSU1): Prepares for a transition to program mode. Do not set the

SWE1, ESU1, EV1, PV1, E1, or P1 bit at the same time.

Bit 4: PSU1

Description

Program setup cleared

(Initial value)

Program setup

[Setting condition]

When FWE = 1 and SWE1 = 1

• Bit 3—Erase-Verify 1 (EV1): Selects erase-verify mode transition or clearing. Do not set the

SWE1, ESU1, PSU1, PV1, E1, or P1 bit at the same time.

Bit 3: EV1

Description

Erase-verify mode cleared

(Initial value)

Transition to erase-verify mode

[Setting condition]

When FWE = 1 and SWE1 = 1

• Bit 2—Program-Verify 1 (PV1): Selects program-verify mode transition or clearing. Do not set

the SWE1, ESU1, PSU1, EV1, E1, or P1 bit at the same time.

Bit 2: PV1 Description

Program-verify mode cleared

(Initial value)

Transition to program-verify mode

[Setting condition]

When FWE = 1 and SWE1 = 1

SH7052 Datasheet(PDF) 723 Page - Renesas Technology Corp