EX613 V2.2 07/08

5

Operation

NOTES: Read and understand all Warning and Caution statements in this operation

manual prior to using this meter. Set the function select switch to the OFF position when

the meter is not in use.

Input Shutter

The Input Shutter inhibits simultaneous connection to the thermocouple jacks and the

DMM input jacks. This is a safety feature which prevents a potentially hazardous condition

from existing during high voltage measurements. Slide the shutter up for test lead

measurements or slide it down for thermocouple temperature measurements.

Non-Contact Voltage Detector

WARNING: Risk of Electrocution. Before use, always test the Voltage Detector on a

known live circuit to verify proper operation.

1.

Rotate the Function switch to any measurement

position.

2.

Place the detector probe tip on the conductor to be

tested.

3.

If AC voltage is present, the NCV detector light will

turn on with a steady red light.

NOTE: The conductors in electrical cord sets are often

twisted. For best results, move the probe tip along

a length of the cord to assure placing the tip in

close proximity to the live conductor.

NOTE: The detector is designed with high sensitivity. Static electricity or other sources of

energy may randomly trip the sensor. This is normal operation.