AM1808AZCED3 datasheet(90/264 Pages) TI

90 / 264 page

AM1808

SPRS653A – FEBRUARY 2010 – REVISED APRIL 2010

www.ti.com

6.8.1.1

Module States

The PSC defines several possible states for a module. This states are essentially a combination of the

module reset asserted or de-asserted and module clock on/enabled or off/disabled. The module states are

defined in Table 6-11.

Table 6-11. Module States

Module State

Module Reset

Module

Module State Definition

Clock

Enable

De-asserted

A module in the enable state has its module reset de-asserted and it has its clock on.

This is the normal operational state for a given module

Disable

De-asserted

Off

A module in the disabled state has its module reset de-asserted and it has its module

clock off. This state is typically used for disabling a module clock to save power. The

device is designed in full static CMOS, so when you stop a module clock, it retains the

module’s state. When the clock is restarted, the module resumes operating from the

stopping point.

SyncReset

Asserted

A module state in the SyncReset state has its module reset asserted and it has its

clock on. Generally, software is not expected to initiate this state

SwRstDisable

Asserted

Off

A module in the SwResetDisable state has its module reset asserted and it has its

clock disabled. After initial power-on, several modules come up in the SwRstDisable

state. Generally, software is not expected to initiate this state

Auto Sleep

De-asserted

Off

A module in the Auto Sleep state also has its module reset de-asserted and its module

clock disabled, similar to the Disable state. However this is a special state, once a

module is configured in this state by software, it can “automatically” transition to

“Enable” state whenever there is an internal read/write request made to it, and after

servicing the request it will “automatically” transition into the sleep state (with module

reset re de-asserted and module clock disabled), without any software intervention.

The transition from sleep to enabled and back to sleep state has some cycle latency

associated with it. It is not envisioned to use this mode when peripherals are fully

operational and moving data.

Auto Wake

De-asserted

Off

A module in the Auto Wake state also has its module reset de-asserted and its module

clock disabled, similar to the Disable state. However this is a special state, once a

module is configured in this state by software, it will “automatically” transition to

“Enable” state whenever there is an internal read/write request made to it, and will

remain in the “Enabled” state from then on (with module reset re de-asserted and

module clock on), without any software intervention. The transition from sleep to

enabled state has some cycle latency associated with it. It is not envisioned to use this

mode when peripherals are fully operational and moving data.

Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Link(s): AM1808

AM1808AZCED3 Datasheet(PDF) 90 Page - Texas Instruments

AM1808AZCED3 Datasheet(HTML) 90 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL