AFS090 datasheet(322/334 Pages) MICROSEMI

322 / 334 page

Datasheet Information

5- 6

R e v ision 2

Preliminary v1.7

(October 2008)

The version number category was changed from Advance to Preliminary, which

means the datasheet contains information based on simulation and/or initial

characterization. The information is believed to be correct, but changes are possible.

For the VIL and VIH parameters, 0.30 * VCCI was changed to 0.35 * VCCI and 0.70

* VCCI was changed to 0.65 * VCCI in Table 2-126 • Minimum and Maximum DC

Input and Output Levels.

2-195

Preliminary v1.7

(continued)

The version number category was changed from Advance to Preliminary, which

means the datasheet contains information based on simulation and/or initial

characterization. The information is believed to be correct, but changes are possible.

N/A

The following updates were made to Table 2-141 • Minimum and Maximum DC Input

and Output Levels:

Temperature

Digital Output

213

00 1111 1101

283

01 0001 1011

358

01 0110 0110 – only the digital output was updated.

Temperature 358 remains in the temperature column.

2-202

In Advance v1.2, the "VAREF Analog Reference Voltage" pin description was

significantly updated but the change was not noted in the change table.

2-227

Advance v1.6

(August 2008)

The title of the datasheet changed from Actel Programmable System Chips to Actel

Fusion Mixed Signal FPGAs. In addition, all instances of programmable system chip

were changed to mixed signal FPGA.

N/A

The references to the Peripherals User’s Guide in the "No-Glitch MUX (NGMUX)"

section and "Voltage Regulator Power Supply Monitor (VRPSM)" section were

changed to Fusion Handbook.

2-32, 2-42

Advance v1.5

(July 2008)

The following bullet was updated from High-Voltage Input Tolerance: ±12 V to High-

Voltage Input Tolerance: 10.5 V to 12 V.

The following bullet was updated from Programmable 1, 3, 10, 30 µA and 25 mA

Drive Strengths to Programmable 1, 3, 10, 30 µA and 20 mA Drive Strengths.

This bullet was added to the "Integrated A/D Converter (ADC) and Analog I/O"

section:

ADC Accuracy is Better than 1%

In the "Integrated Analog Blocks and Analog I/Os" section, ±4 LSB was changed to

0.72. The following sentence was deleted:

The input range for voltage signals is from –12 V to +12 V with full-scale output

values from 0.125 V to 16 V.

In addition, 2°C was changed to 3°C:

"One analog input in each quad can be connected to an external temperature

monitor diode and achieves detection accuracy of ±3ºC."

The following sentence was deleted:

The input range for voltage signals is from –12 V to +12 V with full-scale output

values from 0.125 V to 16 V.

1-4

The title of the datasheet changed from Actel Programmable System Chips to Actel

Fusion Mixed Signal FPGAs. In addition, all instances of programmable system chip

were changed to mixed signal FPGA.

N/A

Advance v1.4

(July 2008)

In Table 3-8 · Quiescent Supply Current Characteristics (IDDQ)1, footnote

references were updated for IDC2 and IDC3.

Footnote 3 and 4 were updated and footnote 5 is new.

3-11

Revision

Changes

Page

AFS090 Datasheet(PDF) 322 Page - Microsemi Corporation

AFS090 Datasheet(HTML) 322 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL