| Electronic Components Datasheet Search |
|
AIC1570CS Datasheet(PDF) 1 Page - Analog Intergrations Corporation |
|
|
|||||||||||||||||||||||||||||
AIC1570CS Datasheet(HTML) 1 Page - Analog Intergrations Corporation |
|
1 / 18 page ![]() AIC1570 5-bit DAC, Synchronous PWM Power Regulator with LDO and Linear Controller DS-1570-00 www.analog.com.tw 1 FEATURES Compatible with HIP6018. Provides 3 Regulated Voltages for Micro- processor Core, Clock and GTL Power. Simple Voltage-Mode PWM Control. Dual N-Channel MOSFET Synchronous Driver. Operates from +3.3V, +5V and +12V Inputs. Fast Transient Response. Full 0% to 100% Duty Ratios. ±1.0% Output Voltage for VCORE and ±2.0% Output Voltage Reference for VCLK and VGTL. TTL Compatible 5-bit Digital-to-Analog Core Output Voltage Selection. Range from 1.3V to 3.5V. 0.1V Steps from 2.1V to 3.5V. 0.05V Steps from 1.3V to 2.05V. Adjustable Current Limit without External Sense Resistor. Microprocessor Core Voltage Protection against Shorted MOSFET. Power Good Output Voltage Monitor. Over-Voltage and Over-Current Fault Monitors. 200KHz Free-Running Oscillator Programmable up to 350KHz. APPLICATIONS Full Motherboard Power Regulation for Computers. DESCRIPTION The AIC1570 combines a synchronous voltage mode controller with a low dropout linear regulator and a linear controller as well as the monitoring and protection functions in this chip. The PWM controller regulates the microprocessor core voltage with a synchronous rectified buck converter. The linear controller regulates power for the GTL bus and the linear regulator provides power for the clock driver circuit. An integrated 5 bit D/A converter that adjusts the core PWM output voltage from 2.1V to 3.5V in 0.1V increments and from 1.3V to 2.05V in 0.05V increments. The linear regulator uses an internal driver device to provide 2.5V±2.5%. The linear controller drives with an external N-channel MOSEFET to provide 1.5V±2.5%. This chip monitors all the output voltages. Power Good signal is issued when the core voltage is within ±10% of the DAC setting and the other levels are above their under-voltage levels. Over-voltage protection for the core output uses the lower N- channel MOSFET to prevent output voltage above 115% of the DAC setting. The PWM over-current function monitors the output current by using the voltage drop across the upper MOSFET’s RDS(on), eliminating the need for a current sensing resistor. |
Similar Part No. - AIC1570CS |
|
Similar Description - AIC1570CS |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |