M38510 datasheet(3/21 Pages) TI

3 / 21 page

LF198JAN

www.ti.com

SNOSAJ2A – FEBRUARY 2005 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1)

Supply Voltage

±18V

Power Dissipation (Package Limitation)(2)

500 mW

Operating Ambient Temperature Range

−55°C ≤TA ≤ +125°C

Storage Temperature Range

−65°C to +150°C

Maximum Junction Temperature (TJmax)

+150°C

Input Voltage

Equal to Supply Voltage

Logic To Logic Reference Differential Voltage(3)

+7V,

−30V

Output Short Circuit Duration

Indefinite

Hold Capacitor Short Circuit Duration

10 sec

Lead Temperature (Soldering, 10 sec.)

300°C

TO-99 (Still Air @ 0.5W)

160°C/W

θJA

Thermal Resistance

TO-99 (500 LF/Min Air Flow @ 0.5W)

84°C/W

θJC

TO-99

48°C/W

ESD Tolerance(4)

500V

(1)

“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions

(2)

The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the ambient temperature,

TA. The maximum allowable power dissipation at any temperature is PD = (TJMAX − TA)/θJA, or the number given in the Absolute

Maximum Ratings, whichever is lower. .

(3)

Although the differential voltage may not exceed the limits given, the common-mode voltage on the logic pins may be equal to the

supply voltages without causing damage to the circuit. For proper logic operation, however, one of the logic pins must always be at least

2V below the positive supply and 3V above the negative supply.

(4)

Human body model, 100pF discharged through 1.5K

Ω

Quality Conformance Inspection

Mil-Std-883, Method 5005 — Group A

Subgroup

Description

Temperature (°C)

Static tests at

+25°C

Static tests at

+125°C

Static tests at

−55°C

Dynamic tests at

+25°C

Dynamic tests at

+125°C

Dynamic tests at

−55°C

Functional tests at

+25°C

Functional tests at

+125°C

Functional tests at

−55°C

Switching tests at

+25°C

Switching tests at

+125°C

Switching tests at

−55°C

Submit Documentation Feedback

Product Folder Links: LF198JAN

M38510 Datasheet(PDF) 3 Page - Texas Instruments

M38510 Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Datasheet Download

Link URL