| Electronic Components Datasheet Search |
|
MIC23451 Datasheet(PDF) 1 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MIC23451 Datasheet(HTML) 1 Page - Micrel Semiconductor |
|
1 / 20 page ![]() MIC23451 3MHz, 2A Triple Synchronous Buck Regulator with HyperLight Load® and Power Good HyperLight Load is a registered trademark of Micrel, Inc. Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com November 5, 2013 Revision 1.2 General Description The MIC23451 is a high-efficiency, 3MHz, triple 2A, synchronous buck regulator with HyperLight Load® mode. HyperLight Load provides very-high efficiency at light loads and ultra-fast transient response, which is ideal for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors. The 4mm x 4mm QFN package saves board space and requires only five external components for each channel. The MIC23451 is designed for use with a very small inductor, down to 0.47µH, and an output capacitor as small as 2.2µF that enables a total solution size that is less than 1mm height. The MIC23451 has a very-low quiescent current of 24µA each channel and achieves as high as 81% efficiency at 1mA. At higher loads, the MIC23451 provides a constant switching frequency around 3MHz while achieving peak efficiencies up to 93%. The MIC23451 is available in a 26-pin 4mm x 4mm QFN package with an operating junction temperature range from –40°C to +125°C. Datasheets and support documentation are available on Micrel’s web site at: www.micrel.com. Features • 2.7V to 5.5V input voltage • Three independent 2A outputs • Up to 93% peak efficiency • 81% typical efficiency at 1mA • Three independent power good indicators • 24µA typical quiescent current (per channel) • 3MHz PWM operation in continuous mode • Ultra-fast transient response • Low voltage output ripple − 30mVPP ripple in HyperLight Load mode − 5mV output voltage ripple in full PWM mode • Fully integrated MOSFET switches • 0.1µA shutdown current (per channel) • Thermal-shutdown and current-limit protection • Output voltage as low as 1V • 26-pin 4mm × 4mm QFN • –40°C to +125°C junction temperature range Applications • Solid state drives (SSD) • µC/µP, FPGA, and DSP power • Test and measurement systems • Set-top boxes and DTV • High-performance servers • Security/surveillance cameras • 5V POL applications Typical Application |
Similar Part No. - MIC23451 |
|
Similar Description - MIC23451 |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |