ACT5880 datasheet(11/87 Pages) ACTIVE-SEMI

11 / 87 page

ACT5880

Rev 2, 03-Sep-13

- 11 -

www.active-semi.com

ActivePMU

TM and ActivePathTM are trademarks of Active-Semi.

I2CTM is a trademark of NXP.

Active-Semi Confidential―Do Not Copy or Distribute

ABSOLUTE MAXIMUM RATINGS

PARAMETER

VALUE

UNIT

CHGIN to GA (Continuous)

BATID, TH, ACIN, HFPWR, VSYS and nSTAT to GA

ODO1 to GLED

ODO2, ODO3 to GLED

ON6, ON9, REFBP, BBCIN, VALIVE, VBBAT, XTAL-, XTAL+, CLK32, VSEL,

VBAT, CHGLEV, SDA, SCL, PWRHLD, nIRQ, nRSTO, nPBSTAT, nPBIN, OUT1

and OUT2 to GA

XPOS, XNEG, YPOS, YNEG, AUX0, AUX1, AUX2, VD to GD

SW1 to GP1

-0.3 to (VP1 + 0.3)

SW2 to GP2

-0.3 to (VP2 + 0.3)

OUT3, SW3, FB3 to any GP3

OUT6 to GA

-0.3 to (INL6 + 0.3)

OUT7 to GA

-0.3 to (INL7 + 0.3)

OUT8, OUT9 to GA

-0.3 to (INL89 + 0.3)

OUT10, OUT11 to GA

-0.3 to (INL1011 + 0.3)

OUT12, OUT13 to GA

-0.3 to (INL1213 + 0.3)

Difference between any two ground groups: GP1, GP2, GP3, GLED, GD, GA

-0.3 to + 0.3

Junction to Ambient Thermal Resistance (θJA)

°C/W

Power Dissipation, TA=25 ˚C

Power Dissipation Degrading for TA>25 ˚C

mW/°C

Operating Junction Temperature (TJ)

-40 to 150

°C

Operating Ambient Temperature range (TA)

-40 to 85

Storage Temperature

-55 to 150

Lead Temperature (soldering for 10 sec.)

300

: Do not exceed these limits to prevent damage to the device. Exposure to absolute maximum rating conditions for long periods may

affect device reliability. Functional operation at conditions other than the operation conditions specified is not implied. Only one absolute

maximum rating should be applied at any time.

ACT5880 Datasheet(PDF) 11 Page - Active-Semi, Inc

ACT5880 Datasheet(HTML) 11 Page - Active-Semi, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

Datasheet Download

Link URL