| Electronic Components Datasheet Search |
|
28F016XD Datasheet(PDF) 4 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
28F016XD Datasheet(HTML) 4 Page - Intel Corporation |
|
4 / 54 page ![]() 28F016XD FLASH MEMORY E 4 REVISION HISTORY Number Description -001 Original Version -002 Removed support of the following features: • All page buffer operations (read, write, programming, Upload Device Information) • Command queuing • Software Sleep and Abort • Erase All Unlocked Blocks • Device Configuration command Changed definition of “NC.” Removed “No internal connection to die” from description. Added “xx” to Upper Byte of Command (Data) Definition in Sections 4.2 and 4.3. Modified parameters “V” and “I” of Section 5.1 to apply to “NC” pins. Increased IPPS (VPP Read Current) for VPP > VCC to 200 µA at VCC = 3.3V/5.0V. Changed VCC = 5.0V DC Characteristics (Section 5.5) marked with Note 1 to indicate that these currents are specified for a CMOS rise/fall time (10% to 90%) of <5 ns and a TTL rise/fall time of <10 ns. Corrected “RP# high to RAS# going low” to be a “Min” specification at VCC = 3.3V/5.0V. Increased Typical “Word/Block Program Times” (tWHRH1/tWHRH3) for VPP = 5.0V: tWHRH1 from 24.0 µs to 35.0 µs and tWHRH3 from 0.8 sec to 1.2 sec at VCC = 3.3V tWHRH1 from 16.0 µs to 25.0 µs and tWHRH3 from 0.6 sec to 0.85 sec at VCC = 5.0V Changed “Time from Erase Suspend Command to WSM Ready” spec name to “Erase Suspend Latency Time to Read;” modified typical values and added Min/Max values at VCC =3.3/5.0V and VPP =5.0/12.0V (Section 5.10). Minor cosmetic changes throughout document. -003 Added 3/5# pin to Pinout Configuration (Figure 2), Product Overview (Section 1.1) and Lead Descriptions (Section 2.1) Modified Block Diagram (Figure 1): Removed Address/Data Queues, Page Buffers, and Address Counter; Added 3/5# pin Added 3/5# pin to Test Conditions of ICC2 and ICC5 Specifications Modified Power-Up and Reset Timings (Section 5.9) to include 3/5# pin: Removed t5VPH and t3VPH specifications; Added tPLYL, tPLYH, tYLPH, and tYHPH specifications Corrected TSOP Mechanical Specification A1 from 0.50 mm to 0.050 mm (Section 6.0) Minor cosmetic changes throughout document. -004 Updated DC Specifications ICC3, ICC4, ICC6, ICC7, ICCD and IPPES Updated AC Specifications tCAS(min), tRCD(max) and tCWD(min) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |